Regviz

Espressif Systems /ESP32 /UART0 /IDLE_CONF

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as IDLE_CONF

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/Espressif Systems/ESP32/UART0/IDLE_CONF#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0RX_IDLE_THRHD0TX_IDLE_NUM0TX_BRK_NUM

Fields

RX_IDLE_THRHD

when receiver takes more time than this register value to receive a byte data. it will produce frame end signal for uhci to stop receiving data.
TX_IDLE_NUM

This register is used to configure the duration time between transfers.
TX_BRK_NUM

This register is used to configure the num of 0 send after the process of sending data is done. it is active when txd_brk is set to 1.

Links

()

Register License

Copyright 2024 Espressif Systems (Shanghai) PTE LTD

Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

 ()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data